Less power consumption and minimum maintenance make the hydraulic rock breaker highly.
Dec 22, 2. Greasing the equipment: This is pruning young cherry trees australia extremely important step because it helps in lubricating and clearing the tool bushing area of debris. Thus, rock breaker should be greased at regular intervals. When greasing the rock breaker, manufacturer’s recommendations should be followed.
Removing Breaker Body from Housing 46 Breaker Body Disassembly 47 Seal Bushing – Re-sealing 55 This is optimum production. If the operator has to re-position the breaker towards the edge of the rock and gradually downsize the material, the.
3) With the bracket bolt nut side of the bracket plate facing up, loosen the bracket bolt nut and remove. bushing. Remove the tool and check the bushing. If obvious signs of seizing are present, remove the marks from the tool and bushings or replace as necessary. Clean and lubricate the shank before reinstalling the tool. A hydraulic oil leak develops. Stop the unit and make appropriate repairs. Oil leaks can be a result of excessively. Jun 04, Removing the Tool.
require disassembly of breaker. This insert bushing can be made either of steel or Fig. 2 - YES - always keep the breaker perpendicular to the rock or to any surfaces Fig. 3 - NO - rest the excavator on an unstable base Fig. 4 - NO - press the breaker tool lightly against the rock.